+1 757-366-9211 sales@bbginc.com

BBG-SSCS Synchro Signal Conversion System

The BBG-SSCS provides four channels of synchro/resolver to high power synchro conversion.
PDF_button

Category:

Card Layout:

The SSCS operates on 115 Volt, 60 Hz AC power to convert synchro inputs into high power synchro outputs. The SSCS accepts two channels of 60 Hz synchro data and two channels of 400 Hz synchro data. Each channel is fault protected against over current and over temperature faults. In addition, the SSCS provides power supply status, BIT status and internal kick circuitry for added control and protection. An onboard microcontroller configures the cards from power up or reset and provides all signals and control to read the synchro input information and output the 125VA synchro/resolver information. Health monitoring of each 1X/36X channel for over-current, over-temperature and loss of reference is provided via visual display indicators. Synchro data formats, power outputs, synchro and resolver voltages and frequencies are factory configured to user requirements.

Technical Specification
Parameter Value Units
Power Input 115 Volts AC
60 Hertz
6.3 Amps
Temperature Range
Operating Temperature -25 to +85 °C
Storage Temperature -65 to +125 °C
Inputs
Reference Input 115 Volts
60/400 Hertz
Synchro (Channel 1 1X , 36X) 90 Volts
60/400 Hertz
Synchro (Channel 2 1X , 36X) 90 Volts
60/400 Hertz
Outputs
Synchro (Channel 1 1X , 36X) 90 Volts
400 Hertz
125 VA (Peak)
30 VA (Continuous)
Synchro (Channel 1 1X , 36X) 90 Volts
60 Hertz
125 VA (Peak)
30 VA (Continuous)
Accuracy +/- 4 Arc Minutes
Physical Characteristics
30.0 x 12.0 x 12.0 Inches
76.2 x 30.48 x 30.48 Centimeters